Overview
Permanently stop stains such as crayon, nicotine, wine and grease from showing through paint with Ronseal's Stain Blocking Aerosol. The quick drying formulation is recoatable in only 10 minutes and there is minimal clean up due to the handy aerosol application. This white base coat can be overcoated with your desired emulsion 24 hours after the final coat.
- Permanently blocks stains
- Quick drying time
- Easy to apply
- Covers tough household stains
| Area | Interior |
| Recommended Use | All bare or previously painted interior walls and ceilings |
| Coverage | 8m² per litre |
| Drying Time | 10 minutes, 24 hours to decorate |
| Re-Coat Time | 10 minutes |
| Recommended Coats | 2-3 Coats |
| Application Method | Aerosol |
Application
We recommend performing a test to ensure compatibility, always follow the manufacturer's instructions found on the packaging.
- Shake the can until you hear it rattle then continue to shake for another minute.
- Hold approximately 20-30cm away from the surface and smoothly spray from side to side to obtain an even finish.
- Allow to dry for 10 minutes before applying a second coat.
- If the stain is still visible after the second coat apply a third.
- Wait 24 hours for the paint to fully dry before decorating over.
Aftercare & Storage
Wait 24 hours until the paint is completely dry before you cover it with paint or wallpaper. Not intended to be a top coat.
Cleaning
To clean the aerosol, turn the can upside down and spray it for a few seconds. Wipe the nozzle with a damp cloth.
